Clean Room Wipe

Cleaning cleanroom surfaces with the correct clean room wipe

Clean room surfaces are usually cleaned by using hand wipes. There are several common variations of clean room wipes. Cotton Cleanroom Wipes, Custom Solvent Cleanroom Wipes, ESD Wipes, Nonwoven Cleanroom Wipes, Foam Cleanroom Wipes, Polyester Kint Cleanroom Wipes, and Polyester Sealed Edge Cleanroom Wipes are most commonly found in clean rooms and labs. The use of pre saturated wipes with a blend of 70% Isopropyl alcohol and 30% Di Ionized water is very effective when “wet cleaning” is necessary. These wipes are packed in user friendly containers and have no loose stringy fibers that are common with wet wipes in round pop-up canisters. If static charge is a concern, ESD wipes are available such as (VS5-99). VS5 employ carbon fibers within the knit fabric.

Cleanroom Wipe Dispensers

Wipe dispensers can help reduce wasteful use of wipes as well as eliminate cross-contamination. The GRAB-EEZ wipe dispenser, manufactured by High-Tech Conversions is an ESD safe dispenser that conforms to Good Housekeeping practices.

Click for more Information on this clean room wipe dispenser

Cleanroom Approved Materials Only!

• Only use Cleanroom apporved wipes, apparel, gloves, boot covers, coveralls, aprons, and other garments. These are specifically designed, manufactured, and packaged for clean rooms and controled environments
• Cleanroom approved notebooks, paper and pens
• Wood pulp based materials such as standard paper, books, notebooks, paper-towels and tissue are NOT cleanroom compatible
• Materials such as metal and plastic that can be cleaned with cleanroom wipes are typically approved
• Materials that can trap particles such as wood are NOT cleanroom approved